| Customization: | Available |
|---|---|
| Material: | Galvanized Iron Wire |
| Cross Sectional Shape: | Round |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Bale Tying Wire
Information
Diameter Range of single wire: As determined by a specific project- typical is 2.2mm to 2.3mm plum or minum 0.05mm
Elongation: Minimum 7%/Maxmum 10% in 254mm sample
Tensile Strength: Typical 965-1172Mpa- can vary some based on diameter considerations
Helix (Vertical Cast): Positive target is less than 51mm- not more than 80mm (Reverse cast not permtted)
Horizontal Cast: Target based on coil characteristics noted below is 660-762 mm (Measured across diameter of a complete single loop)
Typical Coil Characteristics:
Internal Diameter: 457mm (Approximate)
External Diameter: 965mm(Approximate)
Net Package Weight:680-820kg(Approximate)
Coating:
Bright Galvanized with a normal thinckness of 54.9 grams of zinc per square meter of wire surface.
Finish:
The wire is coated with a 2-4% solution of specific wax coating for extended resistance to oxidation and surface deterioration.
Continuous Coil- Processing Welds:
Wire will be in continuous coil from top to bottom of each carrier with no loose ends. No more than two process welds are allowed coil (based on typical size note above and in the majority of coils there should be either no weld or only one) Weld area will be dressed properly such that wire diameter and strength are maintained within the wire specification.
Containment:
Wire is usually secured via the use of 20mm flat steel strapping which is tensioned in place with sufficient force to minimize bouncing, chafing or interweaving during handling and transport.
Testing:
Prior to shipment each coil of wire is tested to determine that it meets specification standards for the individual customers requirements. Test results are recorded and sent to the customer for access as required by international Unitizing Regulations on traceability to wire usage on actual pulp production.
The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. Galvanized Wire is produced using soft, medium and hard grade wires. The following table specifies the tensile range according to the grade:
Three different package types, Donut Coils, Carrier Coils, Marathon Packs. Packing considerations common to all types:
Wire is secured with materials which will not promote or accelerate wire deterioration in any manner. Package is designed so that there is no contact between handling equipment and the wire itself. Avoidance of any plastic material being in direct contact with the wire.
Designed to minimize if not eliminate exposure to moisture or contamination of same.
Identification system in place allowing traceability and easy identification of material.
Tianjin Huayuan Times Metal Products Co., Ltd is specialized in steel wire and wire rope producing.The totall capacity is 100,000 tons per years and 80% of the products are for exporting.The company earns ISO 9001:2008; ISO/TS 16949; KS D 7036; JIS G 3547; JIS G 3548 certificate.Main products are galvanized steel wire for mesh; for cable; for rope and automotive systerm etc.
Q: Manufacturer or Trader?
A: We are manufacturer in wire industry for more than 20 years.
Q: Producing Capacity?
A: The producing capacity totally is 9, 000 tons per month. The producing capacity of this product is 1,500 tons per month.
Q: What certificates does my factory have?
A:ISO 9001; ISO/TS 16949; KS; JIS etc
Q: Main Market?
A: Our main market is foreign customers. 80% of the products are for exporting. The main countries are Japan, South Korea, South Asian area, Europe, America, Canada, and South America etc.
Q: What information should I provide when inquiring?
A: The diameter before pvc coating; after pvc coating, the requirement of the core wire like zinc coating, tensile strength, packing, colour
Q: What is the MOQ?
A: For quality checking, we accept small quantity order like one coil. For normal cooperation, we prefer FCL container quantity to ensure the safety of goods in transportation.
Q: What is the payment term?
A: T/T; L/C; D/P etc
Q: Free sample available?
A: Yes. Free sample within 2kg is available
Tianjin Huayuan Group located in Jinghai district, Tianjin, China was founded in 1992 and now has 11 manufacturing branches, 3 trading companies and a recognized technical center. The total assets is over US dollar 220 million and over 2800 employees.
){kind=link}