Customization: | Available |
---|---|
Certification: | ISO |
Surface: | Smooth |
Still deciding? Get samples of US$ 0/kg
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The metallic zinc coatings applied by the galvanizing process are an effective way of combating corrosion in steel.
Additional Info
Diameter Range: 0.2-5.00 mm
Surface Finish: Electro Galvanizing
Given that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between tensile strength.
Nominal Diameter |
Minimum Coating Mass (g/m2) |
over 0.6mm up to and incl. 0.65mm |
25 |
over 0.75mm up to and incl. 0.85mm |
25 |
over 0.85mm up to and incl. 0.95mm |
25 |
over 0.95mm up to and incl. 1.06mm |
25 |
over 1.06mm up to and incl. 1.18mm |
25 |
over 1.18mm up to and incl. 1.32mm |
30 |
over 1.32mm up to and incl. 1.55mm |
30 |
over 1.55mm up to and incl. 1.80mm |
30 |
over 1.80mm up to and incl. 2.24mm |
30 |
over 2.24mm up to and incl. 2.72mm |
35 |
over 2.72mm up to and incl. 3.15mm |
35 |
over 3.15mm up to and incl. 3.55mm |
45 |
over 3.55mm up to and incl. 4.25mm |
50 |
over 4.25mm up to and incl. 5.00mm |
50 |
Diameter Properties
Standard Galvanized Wire is manufactured to comply with the following diameter tolerances:
Nominal Wire Diameter |
Tolerance (mm) |
over 0.80mm up to and incl. 1.60mm over 1.60mm up to and incl. 2.50mm over 2.50mm up to and incl. 4.00mm over 4.00mm up to and incl. 6.00mm over 6.00mm up to and incl. 10.00mm |
+/-0.03 +/-0.03 +/-0.03 +/-0.03 +/-0.03 |
A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.
Tensile Grade |
% Carbon |
% Phosphorus |
% Manganese |
% Silicon |
% Sulphur |
Soft Medium Hard |
0.05 max 0.15-0.19 0.04-0.07 |
0.03 max 0.03 max 0.03 max |
0.05 max 0.70-0.90 0.40-0.60 |
0.12-0.18 0.14-0.24 0.12-0.22 |
0.03 max 0.03 max 0.03 max |
The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. Galvanized Wire is produced using soft, medium and hard grade wires. The following table specifies the tensile range according to the grade:
Grade |
Tensile Strength (Mpa) |
Galvanised - Soft Quality Galvanised - Medium Quality Galvanised - Hard Quality |
380/550 500/625 625/850 |
Please note that the sizes mentioned above are indicative only and do not specify the size range available from my products range.
1) All the products are packed with seaworthy packing.
2) Customer's special requirement for packing can be satisfied.
3) Air freight; sea freight and truck freight are all available.
Tianjin Huayuan Group located in Jinghai district, Tianjin, China was founded in 1992 and now has 11 manufacturing branches, 3 trading companies and a recognized technical center. The total assets is over US dollar 220 million and over 2800 employees.Tianjin Huayuan Group located in Jinghai district, Tianjin, China was founded in 1992 and now has 11 manufacturing branches, 3 trading companies and a recognized technical center. The total assets is over US dollar 220 million and over 2800 employees.
The picture below is our factory equipment.
Q: Manufacturer or Trader?
A: We are manufacturer in wire industry for more than 20 years.
Q: Producing Capacity?
A: The producing capacity totally is 9, 000 tons per month. The producing capacity of this product is 1,500 tons per month.
Q: Main Market?
A: Our main market is foreign customers. 80% of the products are for exporting. The main countries are Japan, South Korea, South Asian area, Europe, America, Canada, and South America etc.
Q: What information should I provide when inquiring?
A: The diameter before pvc coating; after pvc coating, the requirement of the core wire like zinc coating, tensile strength, packing, colour
Q: What is the MOQ?
A: For quality checking, we accept small quantity order like one coil. For normal cooperation, we prefer FCL container quantity to ensure the safety of goods in transportation.
Q: What is the payment term?
A: T/T; L/C; D/P etc
Q: Free sample available?
A: Yes. Free sample within 2kg is available
Q: Third Party Inspection available?
A: Yes, available. The charges are on the buyer.