Electromagnetic Multidisc Clutches Brakes
Electromagnetic Tooth Clutches Brakes and Electromagnetic Tooth Clutches with Positioning
Electromagnetic Singledsic Clutches Brakes
Electromagnetic Powerlost Clutches Brakes
Electromagnetic Clutches-Brakes Units
Brushes/Controlled Circuit
We accept customization
The toothed electromagnetic clutch is mainly used in the mechanical transmission system, which can realize the combination of the driven part and the active part when the relative speed of the main and driven part is low or zero, so as to play the purpose of starting and stopping reversing and positioning.
Installation
1. Before installation, check that the friction plate should be free of debris.
2. The clutch must be kept oil lubrication for a long time, or semi-immersed.
3. It can be installed horizontally or vertically.
4. When installing with broken shaft, the coaxiality between the active part and the driven part should be less than 0.07mm.
5. The driving part and the driven part must be fixed axially separately to avoid tampering.
6.Multi-disc electromagnetic clutch friction plate in the use of about 1 year after the wear, should adjust the air gap &.The method is: loosen the screw on the adjusting mother, rotate the adjusting mother, in the energized state, so that & to reach the specified value in the table, and then tighten the screw.
){kind=link}