| Customization: | Available |
|---|---|
| Certification: | ISO |
| Surface: | Smooth |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hoist Ropes
With the advent of high rise elevators and increased car speeds, elevator designers and manufacturers frequently select a higher strength hoist rope. The grade of steel (traction, extra high strength traction) is dependent upon many factors, the most critical being load requirement and car speed. It is not always advantageous to use an EHS traction rope where traction will suffice. The low carbon wire used on traction grade wire ropes may provide better fatigue life than a higher carbon EHS wire.
Drum and Counterweight
Ropes
Use 8x19 Seale traction steel ropes for most drum and counterweight ropes. If the drum and sheave material of the existing elevator is softer than that required for traction steel, the use of iron ropes may be considered.
Compensating Ropes
8x25 Filler Wire traction steel ropes provide longer and more economical service. For existing installations that require iron, WW suggests 8x25 Filler Wire.
Governor Ropes
Use an 8-strand traction steel governor rope for longer service life, unless iron is specified. Make sure replacement governor ropes are in accordance with the elevator manufacturer's specifications
|
Frame |
6×19S+Fc |
6×19W+Fc |
||||||
|
wire ropeNominal diameter |
Reference weight |
Most breaking rally/kN |
||||||
|
mm |
kg/100m |
Double strength/Mpa |
Single-strength/Mpa |
|||||
|
1180/1770 |
1320/1620 |
1370/1770 |
1570/1770 |
1570 |
1620 |
1770 |
||
|
6 |
12.9 |
16.3 |
16.8 |
17.8 |
19.5 |
18.7 |
19.2 |
21 |
|
6.3 |
14.2 |
17.9 |
- |
- |
21.5 |
- |
21.2 |
23.2 |
|
6.51) |
15.2 |
19.1 |
19.7 |
20.9 |
22.9 |
21.9 |
22.6 |
24.7 |
|
81) |
23 |
28.9 |
29.8 |
31.7 |
34.6 |
33.2 |
34.2 |
37.4 |
|
9 |
29.1 |
36.6 |
37.7 |
40.1 |
43.8 |
42 |
43.3 |
47.3 |
|
9.5 |
32.4 |
40.8 |
42 |
44.7 |
48.8 |
46.8 |
48.2 |
52.7 |
|
101) |
35.9 |
45.2 |
46.5 |
49.5 |
54.1 |
51.8 |
53.5 |
58.4 |
|
111) |
43.4 |
54.7 |
54.3 |
59.9 |
65.5 |
62.7 |
64.7 |
70.7 |
|
12 |
51.7 |
65.1 |
67 |
71.3 |
77.9 |
74.6 |
77 |
84.1 |
|
12.7 |
57.9 |
72.9 |
75 |
79.8 |
87.3 |
83.6 |
86.2 |
94.2 |
|
131) |
60.7 |
76.4 |
78.6 |
83.7 |
91.5 |
87.6 |
90.3 |
98.7 |
|
14 |
70.4 |
88.6 |
91.2 |
97 |
106 |
102 |
105 |
114 |
|
14.3 |
73.4 |
92.4 |
- |
- |
111 |
- |
- |
119 |
|
15 |
80.8 |
102 |
- |
111 |
122 |
117 |
- |
131 |
|
161) |
91.9 |
116 |
119 |
127 |
139 |
133 |
137 |
150 |
|
17.5 |
110 |
138 |
- |
- |
166 |
- |
- |
179 |
|
18 |
116 |
146 |
151 |
160 |
175 |
168 |
173 |
189 |
|
191) |
130 |
163 |
168 |
179 |
195 |
187 |
193 |
211 |
|
20 |
144 |
181 |
186 |
198 |
216 |
207 |
214 |
234 |
|
20.6 |
152 |
192 |
- |
- |
230 |
- |
- |
|
1) All the products are packed with seaworthy packing.
2) Customer's special requirement for packing can be satisfied.
3) Air freight; sea freight and truck freight are all available.
We use total quality control system. Every pieces of the raw material; semi-finished products and finished products are tested and recorded in file. The tracking record is used from final products to the very first beginning raw material steel factories.
Third Part like SGS is available for test control before shipment
A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.
|
Tensile Grade |
% Carbon |
% Phosphorus |
% Manganese |
% Silicon |
% Sulphur |
|
Standard |
0.45~0.50 |
0.032 |
0.5 ~1.00 |
0.10~0.34 |
0.041 |
|
High |
0.59~0.63 |
0.035 |
0.5 ~1.10 |
0.10~0.35 |
0.045 |
|
Extra-High |
0.65~0.83 |
0.035 |
0.5 ~1.10 |
0.10~0.35 |
0.045 |
Q: Manufacturer or Trader?
A: We are manufacturer in wire industry for more than 20 years.
Q: Producing Capacity?
A: The producing capacity totally is 9, 000 tons per month. The producing capacity of this product is 1,500 tons per month.
Q: Main Market?
A: Our main market is foreign customers. 80% of the products are for exporting. The main countries are Japan, South Korea, South Asian area, Europe, America, Canada, and South America etc.
Q: What is the MOQ?
A: For quality checking, we accept small quantity order like one coil. For normal cooperation, we prefer FCL container quantity to ensure the safety of goods in transportation.
Q: What is the payment term?
A: T/T; L/C; D/P etc
Q: Free sample available?
A: Yes. Free sample within 2kg is available
Q: Third Party Inspection available?
A: Yes, available. The charges are on the buyer
Tianjin Huayuan Group located in Jinghai district, Tianjin, China was founded in 1992 and now has 11 manufacturing branches, 3 trading companies and a recognized technical center. The total assets is over US dollar 220 million and over 2800 employees.
The picture below is our factory equipment.
){kind=link}